IPSO - Commands

Wednesday, 10 December 2008 12:43

Firewalls - Checkpoint - IPSO Nokia

Below are the command IPSO commands that can be used,

IPSO commands

newimage Installs IPSO OS from the local machine
newpkg -m localhost Checkpoint package Install
clish IPSO OS CLI
ipsctl -a displays all of the IPSO Settings and Values
ipsctl -a ifphys:eth-s5p1:errors|more display errors on eth-s5p1
ipsctl -w net:ip:tcp:default_mss 1460 Change MSS to 1460
netstat 1
shows network stats every second
ipsofwd list
displays ipso properties (flowpath, etc)
ipsofwd slowpath
 turns off flows (flowpath turns back on)
fsck -fyb 32
check the file system on a flash based nokia (KB 1355433)

Bootmgr

printenv
print environment variables
install 
install an image across the network
boot
boot  an image

clish commands

show useful-stats
 Shows Disk, VRRP, RAM summary
show package all

show package active

show package inactive

show images 

show image current 

  
delete image [name]
  
set hostname testbox
Set Hostname
set date timezone-city "Greenwich (GMT)"
Set Timezone
set static-route default nexthop gateway address 192.168.29.2 priority 1 on
Set default gateway
set static-route 10.2.2.15/32 nexthop gateway address 192.168.0.1 on
Add static routes
set interface eth2 speed 100M duplex full active on --- add interface eth2c0 address 192.168.1.1/24 enable
Add an interface
set interface eth-s3/s1p1 active off
 
set hostname testbox
set hostname 
set package name name [on | off]
set package name
  
add arpproxy address 192.168.1.1 macaddress 0:a0:1b:3e:33:f1
Add Proxy arp
add ntp server 10.1.1.2 version 3 prefer yes
Add an NTP server
add package media local name [opt/packages/IPSO-3.9.tgz]
add host name testbox ipv4 192.168.29.54
 set hostname assignment